DIN 763 Long Link Chain | Tested Non-Calibrated German Standard Chain for Marine and Industrial Use

DIN 763 Long Link Chain | Tested Non-Calibrated German Standard Chain for Marine and Industrial Use

Product Overview

DIN 763 long link chain is a welded round steel chain supplied for general-purpose holding, securing, barrier, engineering, agricultural, industrial, and selected marine auxiliary applications where a long-link, non-calibrated chain is required. It is commonly selected when the customer needs easier connection with hooks, shackles, or fittings, and when the chain is not intended to run over calibrated pocket wheels, chain wheels, or windlass gypsies.

This page is prepared for DIN 763 tested non-calibrated long-link round steel chain supplied through qualified chain manufacturing partners. The supplied size range is 2 mm to 32 mm, with zinc plated, black painted, hot dip galvanized, powder coated, self-colour, or customized finishes available. Because DIN 763 is not a lifting-chain standard, it should not be used as a chain sling, basket hitch, choker hitch, hoist chain, anchor chain, or certified lifting accessory unless a separate approved specification and certificate are confirmed before order.

Quick Specifications

• Product type: DIN 763 long link chain → tested non-calibrated welded round steel chain for general marine and industrial use.
• Standard reference: DIN 763:1990-12 → public DIN Media information identifies this standard as tested, non-calibrated, long-link round steel chains.
• Chain size range: 2 mm to 32 mm → covers light barrier / guard chains through heavier general-purpose securing and industrial chains.
• Construction: flash butt welded / side welded chain links → weld quality, link geometry, and surface condition should be checked according to order scope.
• Load data supplied: working load in kg, test load in N, and breaking load in N → keep these terms separate and do not rewrite them as SWL, WLL for lifting, proof load, or sling capacity.
• Surface finish: zinc plated, black painted, hot dip galvanized, powder coated, or self-colour → select according to corrosion environment, appearance, and handling requirement.
• Application limit: non-calibrated long link chain → not suitable for calibrated chain wheels, hoists, windlasses, or lifting sling assemblies without separate approval.
• Supply mode: supplied according to customer order length, finish, packing, certificate, and test document requirement → factory source and delivery plan can be arranged for batch orders.

Main Technical Parameters

Selection & Inquiry Guide

Step 1: Confirm DIN 763 long link chain and whether the project requires DIN 763:1990-12, a project-specific drawing, or another long-link chain standard.

Step 2: Select chain diameter from 2 mm to 32 mm according to working load, breaking load, link opening, connected fitting size, and required weight per metre.

Step 3: Confirm application: marine general-purpose securing, industrial guard chain, engineering use, agricultural chain, barrier chain, or non-lifting connection use.

Step 4: Confirm finish: zinc plated, hot dip galvanized, black painted, powder coated, self-colour, or customized coating according to corrosion environment and appearance requirement.

Step 5: Confirm order length, packing form, quantity, marking, test document, material certificate, surface finish certificate, and whether third-party inspection is required.

Step 6: Provide delivery destination, required delivery time, intended application, reference photo or drawing, and any customer-specific acceptance criteria.

Structure

Long round steel link | Welded link joint | Non-calibrated pitch | Open long-link geometry | Zinc plated / painted / hot dip galvanized / powder coated finish | Supplied in coil, bundle, drum, or cut length

Load, Testing & Supply Advantages

• The long-link geometry provides more space inside each link, making it convenient for connection with hooks, shackles, pins, and general-purpose fittings when compared with short-link chains.
• DIN 763 is a non-calibrated chain reference. This is important because it should not be selected for equipment that needs calibrated pitch engagement, such as chain wheels, hoists, or windlass gypsies.
• The supplied table gives working load, test load, and breaking load. Keeping these load terms separate helps avoid incorrect use as lifting WLL, proof load, MBL for certified lifting, or anchor-chain test data.
• Flash butt welded / side welded links can be checked by visual inspection, dimensional checking, sample load test, surface finish inspection, and packing inspection according to order scope.
• Surface protection can be selected by environment: zinc plated for general indoor or light-duty corrosion protection, hot dip galvanized for stronger outdoor / marine exposure, painted or powder coated for identification and appearance.
• For marine supply, hot dip galvanized or painted finishes should be selected together with storage environment, salt exposure, handling abrasion, and required service life.
• As a supply item, this chain can be sourced from long-term qualified manufacturing partners with stable batch supply, cost-effective pricing, and optional customer-specific inspection arrangement.
• If the chain is required for lifting, hoisting, chain sling, or safety-critical load suspension, a separate lifting-chain standard such as EN 818 series or project-approved chain specification should be confirmed instead of using DIN 763 by default.

Custom Attributes

• Standard: DIN 763 → German standard long link chain reference for tested, non-calibrated round steel chains.
• Chain Type: Long link welded chain → suitable for general connection, barrier, securing, and non-calibrated chain use.
• Supplied Type Description: Cranked link chain stated in source data → final product name should be confirmed if the customer requires a specific cranked-link form.
• Chain Diameter: 2 mm to 32 mm → select according to load table, fitting compatibility, and weight per metre.
• Material: Alloy steel / high tensile steel / heat-treated steel as supplied data → exact grade, heat treatment, and mechanical requirement should be confirmed before order.
• Surface Treatment: Zinc plated / black painted / hot dip galvanized / powder coated / self-colour → select according to corrosion exposure and customer requirement.
• Inspection: Dimensional check, surface check, test load document, and breaking load reference → inspection scope should be agreed before quotation.
• Use Limitation: Not for chain sling, choker hitch, hoist chain, anchor chain, calibrated windlass chain, or lifting device unless separately certified and approved.

How It Works

Customer selects chain diameter and finish → Chain is supplied in coil, bundle, drum, or cut length → Compatible hooks, shackles, pins, or fittings connect through the long links → The chain is used within the stated working load and application limits → Inspection document and packing are confirmed according to order scope

Applications

Marine general-purpose chain | Ship auxiliary securing | Guard chain | Barrier chain | Engineering use | Industrial connection | Agricultural use | Workshop handling support | Petrochemical and coal mine non-lifting auxiliary applications | Replacement chain supply

Certifications & Advantages

Inspection documents, maker certificate, material certificate, surface treatment certificate, and third-party inspection can be arranged according to order scope, test requirement, material traceability, and customer approval procedure. Classification society certificates for general-purpose chain should be confirmed before quotation and are not supplied by default.

Certification: CCS, NK, BV, ABS, DNV, LR, KR, IRS, RS, RINA, CRS, Makers Test Certificate.

Drawing & Photos

FAQ

Q1: Can DIN 763 long link chain be used as a lifting chain sling?

A1: No. DIN 763 long link chain should not be used as a chain sling, basket hitch, choker hitch, hoist chain, or lifting accessory unless a separate lifting-chain standard, approval document, and certificate are confirmed. For lifting use, the customer should specify the required lifting-chain standard and safety factor before quotation.

Q2: What is the difference between DIN 763 chain and calibrated chain?

A2: DIN 763 is a tested non-calibrated long-link round steel chain. It is suitable for general-purpose connection and securing applications, but not for equipment that requires precise pitch engagement, such as hoists, calibrated chain wheels, or windlass gypsies.

Q3: What information is needed before quotation?

A3: Confirm DIN 763 edition, chain diameter, order length, surface finish, quantity, working environment, required packing, certificate requirement, inspection scope, delivery destination, and required delivery time. If the chain will be used in a safety-critical or load-holding application, provide the working load condition and acceptance criteria.

German Standard DIN 763 Chain

Long Link Chain German Standard

EN standards Long Link Chain

DIN 763 Long Link Chain | Tested Non-Calibrated German Standard Chain for Marine and Industrial Use Images